产品中心您现在的位置:首页 > 产品展示 > 涂层/线缆高度/激光测距测试仪 > 英国易高Elcometer│材料检测 > 112/3236六角湿膜梳[Elcometer 112/3236湿膜测厚仪]112/3236六角湿膜测厚仪

[Elcometer 112/3236湿膜测厚仪]112/3236六角湿膜测厚仪

更新时间:2022-07-12

简要描述:

英国易高Elcometer 112和3236六角湿膜梳精密的六角不锈钢材质,经久耐用,可重复使用,厚度范围Z高可达 3000μm (120mils).这些六边湿膜梳的大小各不相同,有24或36个测量值可选,根据型号不同,有增加的精确度可选.

型号:112/3236六角湿膜梳厂商性质:代理商

  免费咨询:86-0755-83986300-606

  发邮件给我们:fuhao@17Lp.com

Elcometer Wet Film Measurement

 

如有任何问题请与我司业务专员:
:豪   
-606   :
fuhao@17Lp.com

英国易高Elcometer 112和3236六角湿膜梳使用精密的六角不锈钢材质,经久耐用,可重复使用,厚度范围zui高可达 3000μm (120mils).

这些六边湿膜梳的大小各不相同,有24或36个测量值可选,根据型号不同,有增加的精确度可选.

使用湿膜梳



将湿膜梳垂直放置,接触到基体。保持原地等待几秒钟,直到梳齿变湿。拿开湿膜梳.

湿膜厚度在"含漆"或"湿"齿zui大值和"不含漆"或"干"齿zui小值之间
How to use a Wet film Comb -

 

ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.

Wet film combs have teeth of various lengths on their sides.

Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.

The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value

Example

In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou.

If the volume to solids ratio of the coating is known (if not contact the coating manufacturer) then the wet film thickness can be used to predict the dry film measurement.

To use combs on pipes, measure along the longitudinal axis (lengthways) of the pipe.

On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.


Elcometer 1123236六角湿膜梳

范围 厚度值
部件编号
20 - 370μm 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 150, 170, 190, 210, 230, 250, 270, 290, 310, 330, 350, 370μm
K0003236M201
25 - 2000μm 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000μm
K0003236M202
25 - 3000μm 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800, 3000μm
B112----1B
0.5 - 15mils 0.5, 0.75, 1.0, 1.25, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12, 13, 14, 15mils
K0US3236M203
1 - 80mils 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 55, 60, 65, 70, 75, 80mils
K0US3236M204
1 - 120mils 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 45, 50, 55, 60, 70, 80, 90, 100, 110, 120mils
B112----2B

Elcometer 1123236六角湿膜梳

 

 

 
AS/NZS 1580.107.3
ASTM D 4414-A
BS 3900-C5-7B
ISO 2808-1A
ISO 2808-7B
NF T30-125
US Navy NSI 009-32
US Navy NSI 009-32

 

符合以下标准

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
深圳市新朗普电子科技有限公司

深圳市新朗普电子科技有限公司

地址:中国深圳市福田区深南中路3037号南光捷佳大厦1402室

主营产品:鸟牌4304A功率计,日本菊水Kikusui,YG108线圈测量仪,滑线变阻器,涂层测厚仪,南京长创,常州安柏Applent,上海沪光,直流电源,电子天平

© 2025 版权所有:深圳市新朗普电子科技有限公司  备案号:粤ICP备11032899号  总访问量:655639  站点地图  技术支持:环保在线  管理登陆

粤公网安备 44030402001457号